Reelcraft Series 30000 Hose Reels ROLLER BRACKET KIT User Manual download pdf

30000 SERIES HOSE REELS

ROLLER BRACKET KIT

CUSTOMER ASSEMBLY GUIDE

FORM# 739-1294

REV: 1/06/a

3. Change Mounting Bolts

1. Remove 3 bolts (1) from reel as shown. (2). Remove and replace

one bolt at a time to insure rigidity of reel during disassembly.

2. Replace 5/16 self tapping bolts with 1/4-20 x 3/4" bolts and nuts.

1. Unscrew swivel (1) from reel.

2. Remove old thread sealant from threads on swivel.

3. Set aside swivel for later reassembly.

Remove Your Swivel

For 6", 12", 18", And 22" Models

1. Remove one post from each roller.

2. Mount both posts with rollers attached onto guide arm. Mount lone

posts to other guide arm.

Your Kit should include the following:

(1) Left Guide Arm (Item #10)

(1) Right Guide Arm (Item #9)

(2) Long Rollers (Item #8)

(2) Short Rollers (Item #5)

(2) Short Shafts (Item #4)

(2) Long Shafts (Item #6)

(4) Posts (Item #1)

(4) 5/16-18 x 1/2" bolts (for step #1), (Item #3)

(6) 1/4-20 x 3/4" bolts (for step #3)

(6) 5/16-12 x 3/4" Screws (for step #3)

*For Models other than 28" reels, the long rollers and posts

will be pre-assembled at the factory.

1. Sub-Assemble Your Roller Bracket

For 28" Models

1. Assemble bottom post (1) to bottom slot (2) in guide arm using

bolts (3).

2. Drop shaft (4) into post and place roller (5) over shaft.

3. Assemble top post to top slot, making sure that top of shaft fits into

hole in top post.

4. Repeat steps #1 through #3 for other side.

5. Fix shafts (6) to posts on one side only using bolts (7) through

posts.

6. Slide rollers (8) over shafts.

*Before any disassembly, see warnings.

WARNING: Even low pressure is very dangerous and may cause

personal injury or death. Relieve line pressure to reel before any

disassembly. To reduce the risk of electric shock, unplug reel before any

alteration to reel is made.

Reelcraft Industries, Inc. • (800) 444-3134 / (260) 248-8188 • Fax: (260) 248-2605

E-mail: [email protected] • Internet: www.reelcraft.com

1 2

Summary of Contents

Page 1 - 3. Change Mounting Bolts

30000 SERIES HOSE REELSROLLER BRACKET KITCUSTOMER ASSEMBLY GUIDEFORM# 739-1294REV: 1/06/a3. Change Mounting Bolts1. Remove 3 bolts (1) from reel as

Page 2 - 3. (Continued)

30000 SERIES HOSE REELSROLLER BRACKET KITCUSTOMER ASSEMBLY GUIDE1. Slip Guide Arm (1) over the three mounting screws (2) as shownand rotate into des

Comments to this Manuals

No comments

Reelcraft Series 30000 Hose Reels ROLLER BRACKET KIT User Manual

Browse online or download User Manual for Equipment Reelcraft Series 30000 Hose Reels ROLLER BRACKET KIT. Reelcraft Series 30000 Hose Reels ROLLER BRACKET KIT User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Reelcraft Series 30000 Hose Reels ROLLER BRACKET KIT