Reelcraft Series 5000 Spring Driven Hose Reels (AxxxxOLBSW23 User Manual download pdf

Operating Instructions

Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725

Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605

Customer Service: 855-634-9109 • [email protected] • www.reelcraft.com

Series 5000 Spring Driven Hose Reels

Low Pressure Potable (Drinking) Water Reel:

A5835 OLBSW23

Dimensions

A 14 3/8”

B 14”

C 9 3/4”

D 2 1/2”

E 6 1/8”

Form# 720-994 Rev: 5/2013

1. Do not use reel at higher pressures or temperatures than

listed on the back of this bulletin.

2. Remove all spring tension before beginning dissassembly

process.

SAFETY

INSTALLATION:

A flexible hose connection must be used between the hose reel inlet and the source of supply to prevent possible

misalignment and binding.

LUBRICATION:

Hose reel spring and bearings are factory lubricated and require no further lubrication.

REPLACING HOSE:

1. Wind spool flange clockwise-facing swivel-until spring is tight.

2. Back off three turns and latch.

3. Insert hose through roller guide.

4. Connect hose fitting to swivel joint and secure hose with clamps.

ADJUSTMENTS:

To adjust spring tension, add or remove wraps of hose from the spool, one wrap at a time until desired tension is

obtained.

REPAIRS:

Extensive repairs should be performed only by an authorized serviceman or factory to avoid damage which may

void your warranty. Remove all spring tension before beginning disassembly process.

MOUNTING:

The hose reel is equipped with a universal mounting bracket so that it can be mounted on the floor, wall or

ceiling; whichever place is convenient. The hose guide arm can be moved to the position desired by removing

the screws fastening the guide bracket to the reel base. Shift the guide arm bracket so the hose comes off the

reel at the desired position and replace the screws. NOTE: For proper installation in wall mount applications, ensure

reel is mounted with inlet on the right as you are facing the reel. Failing to do so could cause latching issues.

1 2 3 4 5 6

Summary of Contents

Page 1 - Operating Instructions

Operating InstructionsReelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4

Page 2

Series 5000 Spring Driven Hose ReelsPage 2www.reelcraft.comItem #Part ## Req.DescriptionItem #Part ## Req.Description1 300031 2 Snap Ring 18 S500103 1

Page 3 - Instrucciones de Operacion

Page 31. No use carreteles a presiones o temperaturas altas que no se mencionan en este boletin.2. Remueva la tencion antes de empezar el proceso

Page 4

Page 4www.reelcraft.comSeries 5000 Carreteles para ManguerasArticuloPart #No Req.DescripcionArticuloPart #No Req.Descripcion1 300031 2 Aro de resorte

Page 5 - Instructions D’Opération

1. N’utillisez pas les enrouleurs à pression plus haut ou aux températures plus hauts que ce qui est noté sur le dos de ce bulletin.2. Enlev

Page 6

Série 5000 Enrouleurs de Tuyau ManuelsPage 6www.reelcraft.comN° d’articleN°depièceN° requis.DéscriptionN° d’articleN°depièceN° requis.Déscription1 300

Comments to this Manuals

No comments