Reelcraft Series 5000 Spring Driven Hose Reels (High Pressur User Manual download pdf

1. Do not use reel at higher pressures or temperatures than listed on

the back of this bulletin.

2. Remove all spring tension before beginning dissassembly process.

SAFETY

Operating Instructions

Series 5000 Spring Driven Hose Reels

High Pressure Model Numbers:

Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725

Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605

Customer Service: 855-634-9109 • [email protected] • www.reelcraft.com

Form# 485-884 Rev: 4/2013

5400 EHP 5430 EHP

5600 EHP 5625 EHP

INSTALLATION:

A flexible hose connection must be used between the hose reel inlet and the source of supply to prevent possible

misalignment and binding.

LUBRICATION:

Hose reel spring and bearings are factory lubricated and require no further lubrication.

REPLACING HOSE:

1. Remove 1/4-20 hex nuts (4) which fasten the hose guide enclosure to the reel back cover and pull off the

enclosure.

2. Wind spool flange clockwise-facing swivel-until spring is tight.

3. Back off three turns and latch.

4. Insert hose through roller guide.

5. Connect hose fitting to swivel joint and secure hose with clamps.

ADJUSTMENTS:

To adjust spring tension, add or remove wraps of hose from the spool, one wrap at a time until desired tension is

obtained.

REPAIRS:

Extensive repairs should be performed only by an authorized serviceman or factory to avoid damage which may

void your warranty. Remove all spring tension before beginning disassembly process.

MOUNTING:

The hose reel is equipped with a universal mounting bracket so that it can be mounted on the floor, wall or

ceiling; whichever place is convenient. The hose guide arm can be moved to the position desired by removing

the 1/4-20 hex nuts (4) fastening the hose guide enclosure to the reel back cover. Shift the hose guide

enclosure to the desired position and replace the 1/4-20 hex nuts. NOTE: For proper installation in wall mount

applications, ensure reel is mounted with inlet on the right as you are facing the reel. Failing to do so could cause

latching issues.

Dimensions

A 15”

B 16 1/4”

C 9 3/4”

D 2 1/2”

E 7”

1 2

Operating Instructions 1

Summary of Contents

Page 1 - Operating Instructions

1. Do not use reel at higher pressures or temperatures than listed on the back of this bulletin.2. Remove all spring tension before beginning d

Page 2

Series 5000 Spring Driven Hose ReelsPage 2www.reelcraft.com12345678910111213141516171819202122232425262728293013313233363534Item # Part # # Req. Descr

More documents for Equipment Reelcraft Series 5000 Spring Driven Hose Reels (High Pressur

To view the document Reelcraft Series 5000 Spring Driven Hose Reels (High Pressur User Manual

Reelcraft Series 5000 Spring Driven Hose Reels (High Pressur User Manual (6 pages)

Comments to this Manuals

No comments