Reelcraft Series 7000 Spring Driven Hose Reels (For Diesel E User Manual download pdf

1. Do not use reel at higher pressures or temperatures than

listed on the back of this bulletin.

2. Remove all spring tension before beginning

dissassembly process.

SAFETY

INSTALLATION:

A flexible hose connection must be used between the hose reel inlet and the source of supply to prevent possible

misalignment and binding.

LUBRICATION:

Hose reel spring and bearings are factory lubricated and require no further lubrication.

REPLACING HOSE:

1. Wind spool flange clockwise-facing swivel-until spring is tight.

2. Back off three turns and latch.

3. Insert hose through roller guide.

4. Connect hose fitting to swivel joint and secure hose with clamps.

ADJUSTMENTS:

To adjust spring tension, add or remove wraps of hose from the spool, one wrap at a time until desired tension is

obtained.

REPAIRS:

Extensive repairs should be performed only by an authorized serviceman or factory to avoid damage which may

void your warranty. Remove all spring tension before beginning disassembly process.

UR7800 OLB UR7830 OLB70 UR7900 OLB

UR7800 OLB70 UR7850 OLB UR7915 OLB

UR7830 OLB UR7850 OLB70 UR7925 OLB

Operating Instructions

Series 7000 Spring Driven Hose Reels

For Diesel Exhaust Fluid (DEF)

Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725

Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605

Customer Service: 855-634-9109 • [email protected] • www.reelcraft.com

Form# 1215-910 Rev: 4/2013

MOUNTING:

The hose reel is equipped with a universal mounting bracket so that it can be mounted on the floor, wall or

ceiling; whichever place is convenient. The hose guide arm can be moved to the position desired by removing

the screws fastening the guide bracket to the reel base. Shift the guide arm bracket so the hose comes off the

reel at the desired position and replace the screws. A 180° wall mount bracket or 340° pivot base are also

available, consult manufacturer

Dimensions

A 20 1/4”

B 19 3/4”

C 7 13/16”

D 3 7/8”

E 7”

1 2 3

Operating Instructions 1

Summary of Contents

Page 1 - Operating Instructions

1. Do not use reel at higher pressures or temperatures than listed on the back of this bulletin.2. Remove all spring tension before beginning

Page 2

Series 7000 Spring Driven Hose ReelsPage 2www.reelcraft.com

Page 3

Item #Description# Req.UR7800 OLB UR7800 OLB70 UR7830 OLB UR7830 OLB70 UR7850 OLB1 Sheave Assembly 1 S260011 S260011 S260011 S260011 S2600112 Drive Sp

Comments to this Manuals

No comments