Reelcraft Series 5000 Spring Driven Hose Reels (Medium Press User Manual download pdf

1. Do not use reel at higher pressures or temperatures than listed on

the back of this bulletin.

2. Remove all spring tension before beginning dissassembly process.

SAFETY

Operating Instructions

Series 5000 Spring Driven Hose Reels

Medium Pressure Model Numbers:

Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725

Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605

Customer Service: 855-634-9109 • [email protected] • www.reelcraft.com

Form# 833-696 Rev: 4/2014

Dimensions

A 14 3/8”

B 14”

C 9 3/4”

D 2 1/2”

E 6 1/8”

5400 OMP 5435 OMP 5625 OMP TH5400 OMP

5420 OMP 5600 OMP 5630 OMP TH5425 OMP

5430 OMP 5620 OMP

INSTALLATION:

A flexible hose connection must be used between the hose reel inlet and the source of supply to prevent possible

misalignment and binding.

LUBRICATION:

Hose reel spring and bearings are factory lubricated and require no further lubrication.

REPLACING HOSE:

1. Wind spool flange clockwise-facing swivel-until spring is tight.

2. Back off three turns and latch.

3. Insert hose through roller guide.

4. Connect hose fitting to swivel joint and secure hose with clamps.

ADJUSTMENTS:

To adjust spring tension, add or remove wraps of hose from the spool, one wrap at a time until desired tension is

obtained.

REPAIRS:

Extensive repairs should be performed only by an authorized serviceman or factory to avoid damage which may

void your warranty. Remove all spring tension before beginning disassembly process.

MOUNTING:

The hose reel is equipped with a universal mounting bracket so that it can be mounted on the floor, wall or

ceiling; whichever place is convenient. The hose guide arm can be moved to the position desired by removing

the screws fastening the guide bracket to the reel base. Shift the guide arm bracket so the hose comes off the

reel at the desired position and replace the screws. NOTE: For proper installation in wall mount applications, ensure

reel is mounted with inlet on the right as you are facing the reel. Failing to do so could cause latching issues.

1 2 3 4 5 6

Summary of Contents

Page 1 - Operating Instructions

1. Do not use reel at higher pressures or temperatures than listed on the back of this bulletin.2. Remove all spring tension before beginning d

Page 2

Series 5000 Spring Driven Hose ReelsPage 2www.reelcraft.comItem # Part # # Req. Description Item # Part # # Req. Description Item # Part # # Req. Desc

Page 3 - Instrucciones de Operacion

1. No use carreteles a presiones o temperaturas altas que no se mencionan en este boletin.2. Remueva la tension antes de empezar el proceso de d

Page 4 - 11 S500107 1

Series 5000 Carreteles para ManguerasPage 2www.reelcraft.comArticuloDescripcionNo.Req.5400 OMP 5420 OMP 5430 OMP 5435 OMP 5600 OMP 5620 OMP 5625 OMP 5

Page 5 - Instructions D’Opération

1. N’utillisez pas les enrouleurs à pression plus haut ou aux températures plus hauts que ce qui est noté sur le dos de ce bulletin.2. Enle

Page 6

Série 5000 Enrouleurs de Tuyau ManuelsPage 6www.reelcraft.comN°d’articleDescriptionN°requis5400 OMP 5420 OMP 5430 OMP 5435 OMP 5600 OMP 5620 OMP 5625

More documents for Equipment Reelcraft Series 5000 Spring Driven Hose Reels (Medium Press

To view the document Reelcraft Series 5000 Spring Driven Hose Reels (Medium Press User Manual

Reelcraft Series 5000 Spring Driven Hose Reels (Medium Press User Manual (2 pages)

Comments to this Manuals

No comments